- Companies
- Products
- Brands
- Accuride
- ASA Hydraulik
- Aventics
- Baldwin Filters
- Bi-Effe
- Bosch Rexroth
- Bühler Technologies
- Dabeb Elram
- Fleetguard
- SPX Globe
- Walterscheid
- Hägglunds
- HYDAC
- HY-PRO
- Intertraco
- Italgroup
- KTR
- OMT–LuEn
- MHA Zentgraf
- M+S Hydraulic
- Stauff
- Naldoni E Biondi
- Hägglunds
- HYDAC
- HY-PRO
- Intertraco
- Italgroup
- KTR
- OMT–LuEn
- MHA Zentgraf
- M+S Hydraulic
- Stauff
- Naldoni E Biondi
- Olaer
- Omal Automation
- Power Team
- SALAMI
- Schmalz
- Sesino
- Settima
- SPX Bolting Systems
- Uniflex
- Services
- Locations in Africa
- About Us
- Contact us
A compact control unit for displaying and storing measured values in a PC network. Measured values are stored on an interchangeable MMC memory card.
The AquaSensor AS 1000 is a reliable, compact solution for the online detection of water in oils, in particular as an OEM sensor for condition monitoring.
Hydac measuring microscopes measure particles on filter membranes of oil samples to ensure optimal condition monitoring and filtration.
Enables the quantitative analysis of water content in percent by volume of mineral and lubricating oils. Display as water content in percent by volume or ppm.
Hy-Pro Filtration’s PM-I allows you to recognise the contamination level changes in hydraulic and lube oil systems with on-line monitoring.
A multifunctional sensor for online condition monitoring of oils in stationary and mobile applications. Ensures deteriorating conditions are quickly identified.
Monitor metallic particle contamination (ferromagnetic and non-ferromagnetic) in lubrication fluid by inductive measurement in the >100 μm size range.
Monitor temperature and water content (saturation) of oil as it enters and exits a lubrication system. Displays values through relay and analogue output signals.
The Hydac Fluid Sampling Set FES is designed for taking static and dynamic oil samples from hydraulic and lubrication systems.
Hydac’s FAS allows you to monitor contamination of oil samples from hydraulic and lubrication systems in terms of their solids contamination.
Hydac Contamination Test Units are used to determine the surface cleanliness of lightly contaminated component. Available across sub-Saharan Africa through HFT.
Analyse the technical cleanliness of components. Contamination is removed from the component surface, and samples are taken from the washing fluid for analysis.
Online condition monitoring CSM 2000 detects particle contamination in hydraulic and lubrication fluids. Ideal for independent particle content analysis.
CSM 1000 is an online condition monitoring system for detecting particle contamination in hydraulic and lubrication fluids with a high proportion of air bubbles.
A stationary sensor for continuous monitoring of particle contamination in fluids. It is ideal for dynamic trend measurement of the contamination.
The Hydac Contamination Sensor CS 1000 is an online fluid sensor for continuous monitoring of particle contamination in fluids.
The CM-RE is a self-priming motor pump unit that enables measurement of oil cleanliness in unpressurised reservoirs, tanks or leakage lines.
Hydac's CMU 1000 is an electronic evaluation unit designed for permanent online condition monitoring of hydraulic systems and machines.
Hydac’s condition monitoring interface is an all-purpose electronic instrument for converting the HSI signal from Hydac sensors into a standardised PC signal.
The Hydac AquaSensor AS 8000 is designed for continuous online detection and measuring of the free water content in mineral and lubrication fluids.
AquaSensor AS 2000 is designed for online measurement and indication of the percentage of dissolved water in hydraulic fluids in addition to temperature.
Hydac Fluid Control Unit (FCU) 2000 is a portable service instrument for measuring particle contamination in hydraulic and lubrication systems.
Hydac's FCU 1000 is a portable service unit for short-term measurement of particle contamination, humidity and temperature of the fluid in hydraulic systems.
A valuable tool for visual analysis of contamination levels and contaminate types in hydraulic and lubrication systems when you need immediate results.
The FCU 8000 measures particle contamination in hydraulic and lubrication systems. Ideal for use in field applications and in laboratories and service centres.