Hoses for heavy duty hydraulics
Power Team's range includes non-conductive hoses with polyurethane coverings, steel reinforced rubber hoses and polyurethane hoses with burst pressures of up to 2 800 bar.
For applications requiring electrical isolation by the hose, non-conductive hose has a leakage factor of less than 50 microamperes, considered a safe level of conductivity by SAE standards. The covering is polyurethane and colored orange for easy identification as nonconductive hose. The covering is not perforated, preventing moisture from entering the hose and affecting its overall conductivity.
All non-conductive hoses have a minimum
urst pressure of 2 800 bar.
6 spiral (R13 specification) rated hose reinforced with two braids of high tensile steel wire and have a tool 4:1 safety factor. The rubber covering is oil and weather resistant.
Made with Nylon core and then one braid of Aramid and one braid of wire reinforcement with a orange polyurethane cover (Conductive). 4:1 safety factor standard 700 bars WP / 2800 bar BP.
Hydraulic hose assembly
No. 9764E – Hose assembly consisting of 9767E (1,8 m hose), 6,4mm I.D. polyurethane with 9798 hose half coupler and 9800 dust cap. No. 9754 – Hose assembly consisting of 9756 (1,8 m hose), 6,4 mm I.D. rubber with 9798 hose half coupler and 9800 dust cap.
- 3/8" NPTF fittings on both ends.
- Operating pressure is 700 bar.
- All comply with SAE 100R10 standards.